[Shotimes] Rod bearings again

[Ron Porter]

Sounds like you don't have all of the bolts out.

If you are really sure, then start to pry it at a corner with a screwdriver
to break the seal.

Ron Porter 

-----Original Message-----
From: Bruce Malachuk [mailto:bmalach1@nycap.rr.com] 
Sent: Tuesday, August 19, 2003 7:33 PM
To: 'Ron Porter'; '`V6 SHOtimes'
Subject: RE: [Shotimes] Rod bearings again


Ok next question. How the heck do I get the oil pan to drop. I was just
holding 90% of my weight from iut and it won't budge. And I am 110% sure
that I have all the bolts and nuts off it. Any specific way of doing it?
I can call one of you if you find it would be easier to tell me over the
phone, I love unlimited long distance calling. 

Bruce Malachuk

94 Opal Frost MTX

93 Black ATX soon to be parts

93 Green MTX - black interior.....soon to be mine



-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Ron Porter
Sent: Tuesday, August 19, 2003 6:57 PM
To: 'Bruce Malachuk'; '`V6 SHOtimes'
Subject: RE: [Shotimes] Rod bearings again


Just the crank (journal) side. No need on the other side.

Screw the "thin film", slop the stuff on!! I use STP-type lube, and put
it on heavy.

Ron Porter

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]
On Behalf Of Bruce Malachuk
Sent: Tuesday, August 19, 2003 6:31 PM
To: '`V6 SHOtimes'
Subject: [Shotimes] Rod bearings again


When I put assembly lube on the bearings do I put a thin film on bothe
sides or just the side facint the crank?
 
Thanks
 

Bruce Malachuk

94 Opal Frost MTX

93 Black ATX soon to be parts

93 Green MTX - black interior.....soon to be mine
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes