[Shotimes] Floored it -- y-pipe seperated from catback

[Neno Albert]

Scott

Unforunately, I only know of the weld-on type. Here's a link to SHO Shop's info about their
conversion kit:

http://shoshop.com/guidelog/v6/p066.htm

I'd imagine you can rig a bracket setup for the flex pipe, though. Problem with the OEM pipe
bolting up would be the need of a gasket there to seal off the mounting point. A good way to avoid
welding would be to get a piece of pipe somewhat larger then what you are currently running to
overlap the Y-pipe and the flex pipe on the front w/ 2 clamps holding them down and ditto for the
flex pipe connection to the cat back. This might leak, but a couple of small tacked on welds would
be no sweat to break off and more then enough to hold the system together with exhaust clamps.

Hope that helps

Neno


--- shewitt@hypercon.net wrote:
> Neno,
> 
> Does the ShoShop flex pipe bolt to the y-pipe side?  I 
> wouldn't want to weld both sides.  How have other put the 
> flex pipe in?
> 
> Scot H
> 95 Red MTX - 67k
> Lewiston, NY