[Shotimes] Heater host Q

[Paul Nimz]

Bulk hose and a 3/4" to 5/8" adapter.  Both readily available from a parts
store.  I have found that all the smaller hoses can be replaced with bulk
hose.  Except the U shaped oil heat exchanger hose.  This can be replaced
with hydraulic hose.  As far as the TB and IAC hoses just chuck them and put
a piece that runs from the coolant pipe back to the block and the lower
radiator hose can be replaced with a NAPA 7311 for the mtx.

Paul Nimz
'97 TR
'93 EG mtx


----- Original Message ----- 
From: "Edward Mazurek" <emazurek@cisco.com>
To: <shotimes@autox.team.net>
Sent: Saturday, August 23, 2003 10:35 AM
Subject: [Shotimes] Heater host Q


> Hi...
>
> 95 MTX
>
>
> I'm trying to replace all the hoses while I'm doing my
> maintenence. There are two short moulded hoses that go
> to/from the heater core by the firwall. I ordered what
> thought would be the two hoses. One is:
>
> V6 MTX Heater hose - tube w/ head tab to heater core KH-295 E9DZ-18472-D
>
> This one seems right.
>
> The other one is:
>
> V6 MTX Heater hose - tube w/ intake tab to heater core E9DZ-18472-E
>
> This one doesn't seem to math the other hose. The hose that is on the car
is
> an "S" shaped moulded hose. It has E9DH-180359-DA (I think) stamped
> on the side. The E9DZ-18472-E hose is completely different as it only has
> about a 45 degreee bend.
>
> I have two questions:
>
> How do I get this hose? No one seems to list it.
>
> What is the E9DZ-18472-E hose for?
>
> Thanks,
>
> Ed Mazurek
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes