[Shotimes] Seat Disassembly/Lumbar Issue

[Chris "Zap"]

    While working out the bugs on the '94, I finally decided to prod around
in the driver's seat and figure out why the lumbar wasn't working.  It turns
out that the hose had huge holes in it right near the connection to the bag
and it cracked right off, leaving a small portion sticking out of the nipple
on the bag.  What I'm wondering is how one goes about removing the seat
cover enough to actually see the area instead of jamming a hand way up there
and wiggling around to feel what's going on.  I have unzipped the bottom of
the seat, but I still cannot pull the "cover" up very far at all.  I am
going to need to pull the old tube piece out with a tool.  I see on the FAQ
that you can use other forms of tubing (copper) to replace the broken piece.
I figure I can probably pick this up at the hardware store, though as long
as I'm going to the stealer, does anyone know if they sell the individual
hoses?

Thanks,
Chris