[Shotimes] Waterpump Replacement ('95 ATX)

[ianf@eden.rutgers.edu]

eh, he said water pump :)

(ok, I am guessing that someone beat me to this already, but if not...)

Ian


> Trade it for an MTX and I can help you better.   :-)
> 
> 1.  Replace the front oil seal, timing belt, and crank position 
sensor while 
> you are in there, unless you know that they are relatively new.
> 2.  Buy your new oil pump before you remove the old one.  Some 
suppliers 
> sell only the front half of the pump, some sell the whole thing, 
therefore 
> you might not get the right gaskets if you pull the pump off 
beforehand.  If 
> possible, replace the o-ring behind the pump between the pump and 
block even 
> if you say buy just the front half of the pump.
> 3.  Rent a puller for the harmonic balancer from someplace like 
Autozone.
> 4.  When you reassemble it be sure that you retorque the harmonic 
balancer 
> bolt to the proper torque value.
> 
> Feel free to ask additional questions as you get into it.
> 
> 
> >I need to relpace the waterpump on my '95 SHO (ATX). Does anyone 
have any 
> >helpful information? PLEASE HELP!!!
> 
> _________________________________________________________________
> Get MSN 8 and enjoy automatic e-mail virus protection.   
> http://join.msn.com/?page=features/virus
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes