[Shotimes] GEN 1 -- Spring Designations and Shock Options

[sho2go]

Ah, another San Diegan..........Fred my '90 has JIT fronts, 954/200 lb. and
EMT 455/130lb rears.  I have an extra set of fronts from an '89 that are
also JITs.........thinking about putting them on the weak fronts on my '95.
The stock front springs on the '95 have sagged noticeably and the car has a
nice rake; I hate to disturb that with some springs that will put it up to
the right height.........
Mike

----- Original Message ----- 
From: "Fred George" <fgeorge@pacbell.net>
To: <shotimes@autox.team.net>
Sent: Tuesday, December 09, 2003 7:11 AM
Subject: [Shotimes] GEN 1 -- Spring Designations and Shock Options


> Folks:
>
> My old '89 also needs springs and shocks. What are the stock spring
> front and rear designations, rated loads and rates per inch of
> compression? Also, what are the best shock / strut options to preserve
> the original Ford balance between performance and ride comfort?
>
> All the best for the Holidays,
>
> Fred George in San Diego
> 89' GEN 1 original owner since new
> 619.275.0222
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes