[Shotimes] which hoses to replace

[Paul Nimz]

I replaced all of mine but the U shaped oil cooler hose with bulk hose.  And
you could use hydraulic hose in this situation as it doesn't kink.  5/8" for
the heater hoses, although there is one 5/8"x3/4" hose.  This I used 3/4" I
think.  There are adaptors to go from 5/8" to 3/4" for the cheap at
autoparts stores.  The smaller hoses are 5/16" I think.  Been a couple of
years.

Paul Nimz
'97 TR
'93 EG mtx


----- Original Message ----- 
From: <mhelpinstill@ampro.net>
To: <Shotimes@autox.team.net>
Sent: Thursday, December 11, 2003 12:47 AM
Subject: [Shotimes] which hoses to replace


> Its time to replace all of the SHO's coolant hoses. I know that not all
> the hoses need to be Ford purchases, some are just sections of bulk
> heater hose - could someone please list the hoses that can be cut from
> bulk and what diameter they are?
>
> thanks as always
> Mark
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes