[Shotimes] 90' GEN-I MTX Cable Shifter Box, woes.

[Johnsho92]

What's the part number for the Mopar clip?  Does it
work in conjunction with the 3/8" hose, or totally
seperate setup?

Thanks JW.


Br,
JW

--- "John J. Weidenbenner" <johnjweid@charter.net>
wrote:
> The mopar clip will work on either trans cable
> connection. The 3/8 OD hose
> can repalce the original rubber bushing on the eye
> end trans cable.
> 
> Replace the bushing and your cable shifter will feel
> like new.
> 
> John W.
> 
> ----- Original Message ----- 
> From: "Johnsho92" <john_sho92@yahoo.com>
> To: "Ron Porter" <ronporter@prodigy.net>;
> <shotimes@autox.team.net>
> Sent: Saturday, December 20, 2003 7:24 PM
> Subject: RE: [Shotimes] 90' GEN-I MTX Cable Shifter
> Box, woes.
> 
> 
> > not sure if it's a mopar clip or anything, but
> it's
> > something that I hear that some people use a 3/8"
> hose
> > that fits ID & OD  perfictly..
> >
> > So far I think I may have a solution based on
> that..
> > It's for the Cable-Eye, and the Ball-joint on the
> > Cable-Shifter-box.
> >
> > Thanks Ron, and everyone..
> >
> > -JW
> >
> >
> > --- Ron Porter <ronporter@prodigy.net> wrote:
> > > Is this where the Mopar clip (part 04340118)
> comes
> > > into play??
> > >
> > > Ron Porter
> > >
> > > -----Original Message-----
> > > From: shotimes-admin@autox.team.net
> > > [mailto:shotimes-admin@autox.team.net]
> > > On Behalf Of Johnsho92
> > > Sent: Saturday, December 20, 2003 5:46 PM
> > > To: Rick Glass; Tim Dahm; kickinsho; George
> Fourchy;
> > > shotimes@autox.team.net
> > > Subject: [Shotimes] 90' GEN-I MTX Cable Shifter
> Box,
> > > woes.
> > >
> > >
> > > Hello,
> > >
> > > My 1990 Black MTX has been stuck in reverse for
> > > quite
> > > some time now, it turns out it's one of the
> linkage
> > > that is in the Shifter itself.  I looked at it
> and
> > > it
> > > seems to be fairly easy to fix.  but Ford, nor
> no
> > > one
> > > so far can help me.  The want me to buy a whole
> new
> > > cable, ~$280 bux.. :(
> > >
> > > It's just a rubber bushing which holds the Eye
> of
> > > the
> > > Cable to the Ball-joint of the Shifter Handle,
> thus
> > > cupping the bushin onto the Ball-joint.   simple
> you
> > > would think.
> > >
> > > I'm asking if anyone knows what I am referring
> to as
> > > well as where I can possibly get a bushing that
> will
> > > work with this setup..
> > >
> > > Again, there's two calbes, one is called
> something
> > > of
> > > Cross-Shift-Cable, the other one is
> > > Engagement-Shift-Cable.  The one which goes into
> > > gears
> > > is the one I'm having issues with..
> > >
> > > any Help?  Thanks a bunch! :)
> > >
> > > -John Wong
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes


__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/