[Shotimes] EATC buttons

[Bruce Malachuk]

I was thinking about doing this myself. I have a 94 with original uncracked
buttons. I was gonna pull it oout sometime this week and try my hand at
reinforcing the buttons. I'm careful how I press the buttons as to not put
stres on them, but some others that have ridden in my car aren't so careful,
and I don't want to be pissed at them for breaking a button on me. I figure
~$5 for clear epoxy is better than trying to get a good deal on a
"redesigned EATC"

Bruce
94 Opal Frost MTX

----- Original Message -----
From: "Paul Nimz" <pnimz@v8sho.com>
To: "`V6 SHOtimes" <SHOtimes@autox.team.net>
Sent: Tuesday, February 18, 2003 12:18 PM
Subject: [Shotimes] EATC buttons


> While working on my old EATC I had the front panel off.  It looks to me
that
> if the bubble buttons are still good and haven't split you could fill them
> from behind with a clear epoxy fairly easily.  This would prevent them
from
> ever cracking.  If you already have small cracks they could be painted
black
> from the front after the epoxy has hardened.
>
> Paul Nimz
> '97 TR SHO
> '93 EG mtx SHO
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes