[Shotimes] EATC buttons

[Paul L Fisher]

Nope! '95 only. You are so lucky. I have a '95 unit in my '93.

Paul L Fisher
'93 Ford Taurus SHO Crimson Clearcoat ATX 171K Build date 11/18/1992
- K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back, Holley
190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus
Stainless Steel Y-pipe, Delrin sub-frame bushings, Amsoil Series 2000 0W-30
oil, Amsoil Synthetic ATF.
'00 Ford Explorer XLT 5.0L V8 AWD Oxford White Clearcoat 41K Build date
11/19/1999
- Amsoil Series 2000 0W-30 oil, K&N Fuel Injection Performance Kit

SHO Club member http://www.shoclub.com/
Check out my web site http://www.paul-fisher.com/
Amsoil dealer http://www.paul-fisher.com/oil.htm

Get $5 free from Paypal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6

----- Original Message -----
From: "Michael S Wojton" <Mike.Wojton@owens-ill.com>
Cc: "`V6 SHOtimes" <SHOtimes@autox.team.net>
Sent: Tuesday, February 18, 2003 12:07 PM
Subject: Re: [Shotimes] EATC buttons


> When was it redesigned?  I thought most of the Gen 2's had the newer
> design.
>
>
> Mike Wojton
> Toledo, Ohio
>
> -'95 Green MTX  3/01-1/03
>    ShoShop y-pipe
>
> -'95 White MTX
>    '96 Brake Upgrade
>
> "Avoid the clap." - Jimmy Dugan
> ------------------( Forwarded letter 1 follows )---------------------
> Date: Tue, 18 Feb 2003 12:37:41 -0500
> To: Paul.Nimz[pnimz]@v8sho.com, `V6.SHOtimes[SHOtimes]@autox.team.net
> From: Bruce.Malachuk[bmalach1]@nycap.rr.com
> Sender: shotimes-admin@autox.team.net
> Subject: Re: [Shotimes] EATC buttons
>
> I was thinking about doing this myself. I have a 94 with original
uncracked
> buttons. I was gonna pull it oout sometime this week and try my hand at
> reinforcing the buttons. I'm careful how I press the buttons as to not put
> stres on them, but some others that have ridden in my car aren't so
careful,
> and I don't want to be pissed at them for breaking a button on me. I
figure
> ~$5 for clear epoxy is better than trying to get a good deal on a
> "redesigned EATC"
>
> Bruce
> 94 Opal Frost MTX
>
> ----- Original Message -----
> From: "Paul Nimz" <pnimz@v8sho.com>
> To: "`V6 SHOtimes" <SHOtimes@autox.team.net>
> Sent: Tuesday, February 18, 2003 12:18 PM
> Subject: [Shotimes] EATC buttons
>
>
> > While working on my old EATC I had the front panel off.  It looks to me
> that
> > if the bubble buttons are still good and haven't split you could fill
them
> > from behind with a clear epoxy fairly easily.  This would prevent them
> from
> > ever cracking.  If you already have small cracks they could be painted
> black
> > from the front after the epoxy has hardened.
> >
> > Paul Nimz
> > '97 TR SHO
> > '93 EG mtx SHO
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes