[Shotimes] Replacement Option for Dynmax Mufflers

[Bruce Malachuk]

from what I understand they just slide right in just like any other muffler.
then clamp them down unless you want to weld them

----- Original Message -----
From: "Tony Fratzke" <tfratzke@hotpop.com>
To: "Bruce Malachuk" <bmalach1@nycap.rr.com>; "SHOTimes"
<shotimes@autox.team.net>
Sent: Thursday, February 27, 2003 7:01 PM
Subject: Re: [Shotimes] Replacement Option for Dynmax Mufflers


> Will these fit and line up correctly with out too much hacking of the
> existing dynomax pipes?
>
> Tony
> 93 ATX
> ----- Original Message -----
> From: "Bruce Malachuk" <bmalach1@nycap.rr.com>
> To: "Tony Fratzke" <tfratzke@hotpop.com>; "SHOTimes"
> <shotimes@autox.team.net>
> Sent: Thursday, February 27, 2003 5:02 PM
> Subject: Re: [Shotimes] Replacement Option for Dynmax Mufflers
>
>
> > Alot of ppl on the SHOforum have been talking about the Summit Turbos
from
> > www.summitracing.com You can get them in a stainless steel or a
aluminized
> > steel version, but I think the aluminized ones are like 15-18 each and
at
> > that price I'll replace them every few years if they rot out. Now that I
> got
> > my SS y-pipe on I need to look at the rest of my exhaust casue I
developed
> a
> > bit of a rasp, even with the cats. It's either a rasp or the heat
> shielding
> > towards the gas tank is hitting the pipes under hard acceleration.
> >
> > I'm gonna order up a pair of the summit turbos tomorrow casue my stock
> (8yr
> > old) mufflers are starting to split at the seam. Now I just have to
decide
> > what tips I want to add to them.
> >
> > Bruce
> > 94 Opal Frost MTX
> > ----- Original Message -----
> > From: "Tony Fratzke" <tfratzke@hotpop.com>
> > To: "SHOTimes" <shotimes@autox.team.net>
> > Sent: Thursday, February 27, 2003 3:43 PM
> > Subject: [Shotimes] Replacement Option for Dynmax Mufflers
> >
> >
> > > Is there a muffler that will fit and mount correctly on a Gen II with
a
> > > Dynomax cat back system?  I am getting really tired of my mufflers
> > > lasting two winters and then having to be replaced.  Someone mentioned
> > > Don Mallinson used some cheap ones, but was that for a Gen I?
> > >
> > >
> > >
> > > Tony
> > >
> > > 93 ATX
> > > _______________________________________________
> > > Shotimes mailing list
> > > Shotimes@autox.team.net
> > > http://www.team.net/mailman/listinfo/shotimes
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes