[Shotimes] intake rubber tube

[Ron Porter]

I saw this type of tubing on John Weidenbenner's car many years ago. I then
searched for it for a few years, and "finally" my local Ace Hardware had it.
It was a 3" tube, with 90-degree bends on each end, and 3.5" ends. When you
cut it in half, it gave you two perfect MAF-to-TB fittings. The same
plumbing piece also comes in 3.5" with  4" end couplings. It is a nice
tubing, as it is the satin-type finish rubber, and it costs around $15.

Keep looking, it's out there.

Ron Porter



-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]On Behalf Of Erik Balser
Sent: Thursday, January 09, 2003 5:36 PM
To: shotimes@autox.team.net
Subject: [Shotimes] intake rubber tube


Ok I'm starting to go crazy looking for a piece of black rubber tube like
the one used in the SS CAI snorkel... The problem I've come across is I
haven't found any sources that sell tubing like that in 3 1/2" size.
Anybody have any suggestions on where I could get a piece of tubing like
that? Thanks

'95 MTX
masho95
http://webpages.charter.net/masho95
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes