[Shotimes] Interchangeable PCM ?

[Paul L Fisher]

No. The ATX PCM has additional signals to control the ATX.

Paul L Fisher
'93 Ford Taurus SHO Crimson Clearcoat ATX 169K Build date 11/18/1992
- K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back, Holley
190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus
Stainless Steel Y-pipe, Delrin sub-frame bushings, Amsoil Series 2000 0W-30
oil, Amsoil Synthetic ATF.
'00 Ford Explorer XLT 5.0L V8 AWD Oxford White Clearcoat 39K Build date
11/19/1999
- Amsoil Series 2000 0W-30 oil, K&N Fuel Injection Performance Kit

SHO Club member http://www.shoclub.com/
Check out my web site http://www.paul-fisher.com/
Amsoil dealer http://www.paul-fisher.com/oil.htm

Get $5 free from Paypal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6

----- Original Message -----
From: <KICKINSHO@aol.com>
To: <shotimes@autox.team.net>
Sent: Sunday, January 12, 2003 1:42 PM
Subject: [Shotimes] Interchangeable PCM ?


>      Quick question
>
> Are the PCM's for the '91 and '93 interchangeable?   The '91 is a MTX and
the
> '93 is an ATX.
>
> We are trying to figure out if the PCM in my '93 is on it's way out.
>
> TIA !
>
> Kris
> '91+ White
> '93 Ultra Red ATX
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes