[Shotimes] CONTROL ARMS (please read) write-up

[Paul L Fisher]

Ian,

I see your point. I think the OEM GTP ones are pretty nice as well. I had
never seen a real picture of them. Since they are $164 for a set of 4 + $45
for the www.shonutperformance.com kit, I can't see where people would really
want to spend the extra $190 for the TCE pieces.

Am I missing something? For some reason, I thought the OEMGTP ones were
wimpy like the OEM Ford ones but with adjusters.

Paul L Fisher
'93 Ford Taurus SHO Crimson Clearcoat ATX 170K Build date 11/18/1992
- K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back, Holley
190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus
Stainless Steel Y-pipe, Delrin sub-frame bushings, Amsoil Series 2000 0W-30
oil, Amsoil Synthetic ATF.
'00 Ford Explorer XLT 5.0L V8 AWD Oxford White Clearcoat 34K Build date
11/19/1999
- Amsoil Series 2000 0W-30 oil, K&N Fuel Injection Performance Kit

SHO Club member http://www.shoclub.com/
Check out my web site http://www.paul-fisher.com/
Amsoil dealer http://www.paul-fisher.com/oil.htm

Get $5 free from Paypal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6

----- Original Message -----
From: "Ian Fisher" <ianf@eden.rutgers.edu>
To: "'V8SHO'" <v8sho@v8sho.com>; <TechSHO@topica.com>; "'SHOtimes
(Team.net)'" <shotimes@autox.team.net>
Sent: Wednesday, January 15, 2003 14:47
Subject: [Shotimes] CONTROL ARMS (please read) write-up


> Please note that I Bcc'ed two people on this:
>
> Once again, I apologize for the cross post.
>
> http://www.eden.rutgers.edu/~ianf/arms.html
>
> Comments, suggestions, are welcome.
>
> Thanks
> Ian
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes