[Shotimes] Dyno charts

[Ron Childs]

I nobody was refering to best economy or best efficiency but best 
performance. For best performance, you want the most hp. Take, for example, 
the 3.0 SHO engine that has nearly the same torque at 3k as at 5k. It is no 
fallacy that you will be getting 60% more power at 5k than at 3k, CVT or 
not. BTW, the torque does not drop off from 3k to 5k but increases slightly.

It may be more efficent to have your CVT run the motor at 3k but if my CVT 
is programmed to run at 6k, I'll beat you in a race every time with double 
the hp.

-Ron Childs


>From: "Ron Porter" <ronporter@prodigy.net>
>To: <shotimes@autox.team.net>
>Subject: RE: [Shotimes] Dyno charts
>Date: Fri, 17 Jan 2003 14:11:23 -0500
>
>Ah, you have hit upon the fallacy of HP numbers. Yes, it is well worth it 
>to
>run that motor at 4,500 rpm if the torque only dropped 1 lb/ft from 200 to
>199 between 1,500 and 4,500, but in reality the torque drops a lot more 
>than
>that as rpm increases.
>
>Ransom's example was the best.....a lawn mower could put out 220 HP like a
>SHO if you could wind it to 150,000 rpm, but all this proves is that the
>whole mathematical concept of "horsepower" is really pretty meaningless.
>
>In a CVT, it may make some sense to run to engine above a peak torque
>number, but it may not make sense to run it at the HP peak, but rather at
>another point between peak torque and peak HP that gives a better 
>efficiency
>ratio.
>
>Theoretically (and practically, from what I've seen), an engine gets it's
>best fuel economy at peak torque. This would seem to be what future engine
>designers would strive for. It is also a big advantage of electric motors
>that have peak torque at "1" rpm.
>
>Ron Porter
>
>-----Original Message-----
>From: Ron Childs [mailto:rchildssho@hotmail.com]
>Sent: Friday, January 17, 2003 1:54 PM
>To: ronporter@prodigy.net; shotimes@autox.team.net
>Subject: RE: [Shotimes] Dyno charts
>
>
>Imagine an engine with a broad torque curve e.g. 200 lb.-ft. from 1500 rpm
>to 5000 rpm. The engine would produce triple the horsepower at 4500 than it
>would at 1500 rpm, even though the torque is the same. This imaginary 
>engine
>would only have 57 hp at 1500 rpm (which may be the torque peak) but 170 hp
>at 4500 if torque dropped to say 199. 57 hp is 57 hp, no matter what your
>torque is.
>
>-Ron Childs
>
>
>
> >From: "Ron Porter" <ronporter@prodigy.net>
> >To: <shotimes@autox.team.net>
> >Subject: RE: [Shotimes] Dyno charts
> >Date: Fri, 17 Jan 2003 12:56:06 -0500
> >
> >In the situation of a CVT, running the engine at peak torque would be the
> >best solution, I believe. Peak torque is where the engine is running most
> >efficiently. Gearing can handle where the speeds should fall. Much like a
> >diesel, they're geared for the lower operating rpm.
> >
> >Ron Porter
> >
> >-----Original Message-----
> >From: shotimes-admin@autox.team.net
> >[mailto:shotimes-admin@autox.team.net]On Behalf Of Ron Childs
> >Sent: Thursday, January 16, 2003 11:16 AM
> >To: shotimes@autox.team.net
> >Subject: RE: [Shotimes] Dyno charts
> >
> >
> >Several cars now, and more to come have CVTs, Continuously Variable
> >Transmissions. Although their behaviour depends on programming, the ideal
> >for performance is to let the engine rev to peak hp and the tranny will
> >adjust and accelerate the car. Wide torque band no longer needed.
> >
> >-Ron Childs  '91
> >
> >
> > >From: "Ron Porter" <ronporter@prodigy.net>
> > >
> > >I agree with your final conclusion, but I don't agree that the amount 
>of
> > >horsepower is "most important"
> > >
> > >In reality, horsepower doesn't exist. It is a math formula to show how
> >much
> > >work is done over time. Torque is a real force, and the horsepower
> > >calculation shows how much work that torque can do.
> > >
> > >Let's look at Ransom's example: a lawnmower producing 220 HP at 150K 
>rpm,
> > >or
> > >a SHO motor producing 220 HP at 6K rpm. They technically producing the
> >same
> > >amount of work at their peaks, but engines don't only run at their 
>power
> > >peaks.
> >
> >
> >_________________________________________________________________
> >MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*
> >http://join.msn.com/?page=features/virus
> >_______________________________________________
> >Shotimes mailing list
> >Shotimes@autox.team.net
> >http://www.team.net/mailman/listinfo/shotimes
> >_______________________________________________
> >Shotimes mailing list
> >Shotimes@autox.team.net
> >http://www.team.net/mailman/listinfo/shotimes
>
>
>_________________________________________________________________
>MSN 8: advanced junk mail protection and 2 months FREE*.
>http://join.msn.com/?page=features/junkmail
>_______________________________________________
>Shotimes mailing list
>Shotimes@autox.team.net
>http://www.team.net/mailman/listinfo/shotimes


_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE* 
http://join.msn.com/?page=features/virus