[Shotimes] Intake tubing...

[Ron Porter]

This is what I figured. I'm sure the piece you got, Don, is the same one I'm
talking about. It is a standard plumbing piece, but no one seems to carry
it. I only found it at ONE Ace Hardware that was the newest one in my area,
none of the others carried it, nor did Home Depot or Lowes, or any other
hardware store.

The piece I got was a perfect fit, and also looks GREAT with a black satin
finish. I have to give John Weidenbenner the credit, though, as I first saw
it on his '93 many years ago.

Ron Porter

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]On Behalf Of don donelson
Sent: Friday, January 17, 2003 5:08 PM
To: Midwest SHO Specialists SHOtimes
Cc: shotimes@autox.team.net
Subject: Re: [Shotimes] Intake tubing...


Also ... home depot .... has some couplings .... that are 90 degrees ...
rubber ... that fit a 77 mass perfectly ..... i than got a 3 " 45 degree
bend mandrel pipe ... for a truck ...about 2 ' long and hand fabricated
everything else.


dond
91 Super SHO II

Best part ... I did all the work & assembly  : )
Engine runs like a scalded dog ! No leaks / No errors !

-3.2 ATX block
-FPS hi-flow heads w/  over sized valves
-Stage I cams
-SHONUT adjustable timing sprockets
-Ported intake & runners
-Ported and extrude honed exhaust manifolds
-Hi-flow catless Y pipe
-Hi-flow exhaust
-BBB
-SHO SHOP T.B.
-SHONUT phenolic spacers
-Quaife
-CAI
-UDP
****
-Cowl hood
-Momo 17x8 rims
-Police grill
-Custom two tone interior
-Complete sunpro gauges
oil temp / water temp / oil pressure
****
-Tokico shocks/Eibach springs
-Polyurethane at all corners
-Solid-sub frame bushings
-Frame stiffners
-Adjustable rear control arms
-Battery located in trunk for better weight distrubution
****
-12" rotors at all four corners
-Steel braided lines
----- Original Message -----
From: Midwest SHO Specialists SHOtimes <MidwestSHOspecialists@hotmail.com>
To: <shotimes@autox.team.net>
Sent: Friday, January 17, 2003 3:33 PM
Subject: [Shotimes] Intake tubing...


> I know this was recently discussed, but I purge my emails frequently.  Can
> someone please inform me as to where I can get some rubber intake tubing
about
> 3.5" in diameter.  I need it to couple things together.  Anyone have any
> ideas?
>
> Mike Kopstain
> Midwest SHO Specialists
> 827 North Chestnut Avenue
> Arlington Heights, IL 60004
> www.MidwestSHO.com
> Sales@midwestsho.com
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes