[Shotimes] Intake tubing...

[Ron Porter]

Just think of Don's posts as Burma Shave signs, and they read just fine!!

All of you young punks under 40 probably don't remember Burma Shave signs,
though!!

Ron Porter

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]On Behalf Of Steve Tatro
Sent: Friday, January 17, 2003 5:29 PM
Cc: shotimes@autox.team.net
Subject: RE: [Shotimes] Intake tubing...


I love....when don d....decides to post....to the list....always....so
much fun....trying to read.


Just kidding Don!

Steve Tatro
Red/Black '93 with 164k miles
Cincinnati, Ohio



-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of don donelson
Sent: Friday, January 17, 2003 5:08 PM
To: Midwest SHO Specialists SHOtimes
Cc: shotimes@autox.team.net
Subject: Re: [Shotimes] Intake tubing...


Also ... home depot .... has some couplings .... that are 90 degrees ...
rubber ... that fit a 77 mass perfectly ..... i than got a 3 " 45 degree
bend mandrel pipe ... for a truck ...about 2 ' long and hand fabricated
everything else.


dond
91 Super SHO II

Best part ... I did all the work & assembly  : )
Engine runs like a scalded dog ! No leaks / No errors !

-3.2 ATX block
-FPS hi-flow heads w/  over sized valves
-Stage I cams
-SHONUT adjustable timing sprockets
-Ported intake & runners
-Ported and extrude honed exhaust manifolds
-Hi-flow catless Y pipe
-Hi-flow exhaust
-BBB
-SHO SHOP T.B.
-SHONUT phenolic spacers
-Quaife
-CAI
-UDP
****
-Cowl hood
-Momo 17x8 rims
-Police grill
-Custom two tone interior
-Complete sunpro gauges
oil temp / water temp / oil pressure
****
-Tokico shocks/Eibach springs
-Polyurethane at all corners
-Solid-sub frame bushings
-Frame stiffners
-Adjustable rear control arms
-Battery located in trunk for better weight distrubution
****
-12" rotors at all four corners
-Steel braided lines
----- Original Message -----
From: Midwest SHO Specialists SHOtimes
<MidwestSHOspecialists@hotmail.com>
To: <shotimes@autox.team.net>
Sent: Friday, January 17, 2003 3:33 PM
Subject: [Shotimes] Intake tubing...


> I know this was recently discussed, but I purge my emails frequently.

> Can someone please inform me as to where I can get some rubber intake
> tubing
about
> 3.5" in diameter.  I need it to couple things together.  Anyone have
> any ideas?
>
> Mike Kopstain
> Midwest SHO Specialists
> 827 North Chestnut Avenue
> Arlington Heights, IL 60004
> www.MidwestSHO.com
> Sales@midwestsho.com _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes