[Shotimes] Intake tubing...

[don donelson]

sorta of like morse code ... :)  .... HA 

That got a chuckle from me

dond
91 Super SHO II

All work & assembly done by yours truly  : )

-3.2 ATX block
-FPS hi-flow heads w/  over sized valves
-Stage I cams
-SHONUT adjustable timing sprockets
-Ported intake & runners
-Ported and extrude honed exhaust manifolds
-Hi-flow catless Y pipe
-Hi-flow exhaust
-BBB
-SHO SHOP T.B.
-SHONUT phenolic spacers
-Quaife
-CAI
-UDP
****
-Cowl hood
-Momo 17x8 rims
-Police grill
-Custom two tone interior
-Complete sunpro gauges
oil temp / water temp / oil pressure
****
-Tokico shocks/Eibach springs
-Polyurethane at all corners 
-Solid-sub frame bushings
-Frame stiffners
-Adjustable rear control arms
-Battery located in trunk for better weight distrubution
****
-12" rotors at all four corners
-Steel braided lines
----- Original Message ----- 
From: Steve Tatro <stevetatro_shotimes@att.net>
Cc: <shotimes@autox.team.net>
Sent: Friday, January 17, 2003 5:29 PM
Subject: RE: [Shotimes] Intake tubing...


> I love....when don d....decides to post....to the list....always....so
> much fun....trying to read.
> 
> 
> Just kidding Don!
> 
> Steve Tatro
> Red/Black '93 with 164k miles
> Cincinnati, Ohio
> 
> 
> 
> -----Original Message-----
> From: shotimes-admin@autox.team.net
> [mailto:shotimes-admin@autox.team.net] On Behalf Of don donelson
> Sent: Friday, January 17, 2003 5:08 PM
> To: Midwest SHO Specialists SHOtimes
> Cc: shotimes@autox.team.net
> Subject: Re: [Shotimes] Intake tubing...
> 
> 
> Also ... home depot .... has some couplings .... that are 90 degrees ...
> rubber ... that fit a 77 mass perfectly ..... i than got a 3 " 45 degree
> bend mandrel pipe ... for a truck ...about 2 ' long and hand fabricated
> everything else.
> 
> 
> dond
> 91 Super SHO II
> 
> Best part ... I did all the work & assembly  : )
> Engine runs like a scalded dog ! No leaks / No errors !
> 
> -3.2 ATX block
> -FPS hi-flow heads w/  over sized valves
> -Stage I cams
> -SHONUT adjustable timing sprockets
> -Ported intake & runners
> -Ported and extrude honed exhaust manifolds
> -Hi-flow catless Y pipe
> -Hi-flow exhaust
> -BBB
> -SHO SHOP T.B.
> -SHONUT phenolic spacers
> -Quaife
> -CAI
> -UDP
> ****
> -Cowl hood
> -Momo 17x8 rims
> -Police grill
> -Custom two tone interior
> -Complete sunpro gauges
> oil temp / water temp / oil pressure
> ****
> -Tokico shocks/Eibach springs
> -Polyurethane at all corners
> -Solid-sub frame bushings
> -Frame stiffners
> -Adjustable rear control arms
> -Battery located in trunk for better weight distrubution
> ****
> -12" rotors at all four corners
> -Steel braided lines
> ----- Original Message -----
> From: Midwest SHO Specialists SHOtimes
> <MidwestSHOspecialists@hotmail.com>
> To: <shotimes@autox.team.net>
> Sent: Friday, January 17, 2003 3:33 PM
> Subject: [Shotimes] Intake tubing...
> 
> 
> > I know this was recently discussed, but I purge my emails frequently.
> 
> > Can someone please inform me as to where I can get some rubber intake 
> > tubing
> about
> > 3.5" in diameter.  I need it to couple things together.  Anyone have 
> > any ideas?
> >
> > Mike Kopstain
> > Midwest SHO Specialists
> > 827 North Chestnut Avenue
> > Arlington Heights, IL 60004
> > www.MidwestSHO.com
> > Sales@midwestsho.com _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes