[Shotimes] Intake tubing...

[John Weidenbenner]

The plumber's piece is called a Plumber's Repair Elbow. I bought it in '96
from whomever was bought out (Builder's Square?) by Home Depot. It is a 90
degree rubber elbowwith screw clamps, I think with 3.5 or 4" ends and 3"
center. The center fits the TB and the end fits the 80 mm Ford MAFS adapter.

John W.
93 atx
89 3.2

----- Original Message -----
From: "Ron Porter" <ronporter@prodigy.net>
To: "don donelson" <1badsho@thenuthouse.com>; "Midwest SHO Specialists
SHOtimes" <MidwestSHOspecialists@hotmail.com>
Cc: <shotimes@autox.team.net>
Sent: Friday, January 17, 2003 4:30 PM
Subject: RE: [Shotimes] Intake tubing...


> This is what I figured. I'm sure the piece you got, Don, is the same one
I'm
> talking about. It is a standard plumbing piece, but no one seems to carry
> it. I only found it at ONE Ace Hardware that was the newest one in my
area,
> none of the others carried it, nor did Home Depot or Lowes, or any other
> hardware store.
>
> The piece I got was a perfect fit, and also looks GREAT with a black satin
> finish. I have to give John Weidenbenner the credit, though, as I first
saw
> it on his '93 many years ago.
>
> Ron Porter
>
> -----Original Message-----
> From: shotimes-admin@autox.team.net
> [mailto:shotimes-admin@autox.team.net]On Behalf Of don donelson
> Sent: Friday, January 17, 2003 5:08 PM
> To: Midwest SHO Specialists SHOtimes
> Cc: shotimes@autox.team.net
> Subject: Re: [Shotimes] Intake tubing...
>
>
> Also ... home depot .... has some couplings .... that are 90 degrees ...
> rubber ... that fit a 77 mass perfectly ..... i than got a 3 " 45 degree
> bend mandrel pipe ... for a truck ...about 2 ' long and hand fabricated
> everything else.
>
>
> dond
> 91 Super SHO II
>
> Best part ... I did all the work & assembly  : )
> Engine runs like a scalded dog ! No leaks / No errors !
>
> -3.2 ATX block
> -FPS hi-flow heads w/  over sized valves
> -Stage I cams
> -SHONUT adjustable timing sprockets
> -Ported intake & runners
> -Ported and extrude honed exhaust manifolds
> -Hi-flow catless Y pipe
> -Hi-flow exhaust
> -BBB
> -SHO SHOP T.B.
> -SHONUT phenolic spacers
> -Quaife
> -CAI
> -UDP
> ****
> -Cowl hood
> -Momo 17x8 rims
> -Police grill
> -Custom two tone interior
> -Complete sunpro gauges
> oil temp / water temp / oil pressure
> ****
> -Tokico shocks/Eibach springs
> -Polyurethane at all corners
> -Solid-sub frame bushings
> -Frame stiffners
> -Adjustable rear control arms
> -Battery located in trunk for better weight distrubution
> ****
> -12" rotors at all four corners
> -Steel braided lines
> ----- Original Message -----
> From: Midwest SHO Specialists SHOtimes <MidwestSHOspecialists@hotmail.com>
> To: <shotimes@autox.team.net>
> Sent: Friday, January 17, 2003 3:33 PM
> Subject: [Shotimes] Intake tubing...
>
>
> > I know this was recently discussed, but I purge my emails frequently.
Can
> > someone please inform me as to where I can get some rubber intake tubing
> about
> > 3.5" in diameter.  I need it to couple things together.  Anyone have any
> > ideas?
> >
> > Mike Kopstain
> > Midwest SHO Specialists
> > 827 North Chestnut Avenue
> > Arlington Heights, IL 60004
> > www.MidwestSHO.com
> > Sales@midwestsho.com
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes