[Shotimes] motor mounts

[Steve Tatro]

I've broken 2 mounts.  ATX ;^)

Steve Tatro
Red/Black '93 with 164k miles
Cincinnati, Ohio



-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Paul L Fisher
Sent: Wednesday, January 22, 2003 3:27 PM
To: Grant Butler; shotimes@autox.team.net
Subject: Re: [Shotimes] motor mounts


No. They are engine specific. I've never actually heard of an ATX
breaking a mount.

Paul L Fisher
'93 Ford Taurus SHO Crimson Clearcoat ATX 170K Build date 11/18/1992
- K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back,
Holley 190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar,
Performance-Plus Stainless Steel Y-pipe, Delrin sub-frame bushings,
Amsoil Series 2000 0W-30 oil, Amsoil Synthetic ATF. '00 Ford Explorer
XLT 5.0L V8 AWD Oxford White Clearcoat 34K Build date 11/19/1999
- Amsoil Series 2000 0W-30 oil, K&N Fuel Injection Performance Kit

SHO Club member http://www.shoclub.com/
Check out my web site http://www.paul-fisher.com/
Amsoil dealer http://www.paul-fisher.com/oil.htm

Get $5 free from Paypal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6

----- Original Message -----
From: "Grant Butler" <shogrant1@satx.rr.com>
To: <shotimes@autox.team.net>
Sent: Thursday, January 23, 2003 02:06
Subject: [Shotimes] motor mounts


> Was wondering if the re-inforced motor mounts that are on the sho nut 
> site will fit an ATX, as they are listed for an MTX....  any help 
> would be appreciated  TIA.. 
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes