[Shotimes] Air Charge Temp Sensor

[Erik Balser]

You're probably talking about an intermittent 114 code? Mine does the same
thing, but the sensor isn't defective.  I have removed the sensor before and
applied heat to it while watching the resistance readings move up and down
depending on whether it was hot or cold.  And the whole time the sensor was
within it's limits.  The ACT is basically a resistor that changes resistance
depending on the temperature it senses, as far as I know they can't
intermittantly work and then not work, I think it's all or nothing with them
(correct me if I'm wrong).  I recently got a EVTM manual so someday when the
114 code comes back I think I'm going to try to find out what's causing this
intermittant 114 code.  Good luck with yours and let us know what you find!

'95 MTX
masho95
http://webpages.charter.net/masho95
----- Original Message -----
From: "ldmagee" <ldmagee@swbell.net>
To: "SHOtimes" <shotimes@autox.team.net>
Sent: Sunday, January 26, 2003 2:36 AM
Subject: [Shotimes] Air Charge Temp Sensor


> Does anyone know the part number of the Air Charge Temperature sensor that
> is located inside the air box?
>
> I am getting an intermittent code that says mine is out of specs and I
need
> to replace it.
>
> Thank you,
>
> L D Magee
> '93 ATX 160k
> Fort Worth, TX
> www.studionvictus.com
> Outgoing Mail Scanned by Norton Antivirus 2003 Pro Edition
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes