[Shotimes] 96+ PFCM brake pads

[Mike.Wojton@us.o-i.com]

Well I have to try to get this damn thing back on the road tonight.
I think I'll just get whatever they have in the 598 size and worry
about getting some good pads later.

Yeah, if you get into the brake survey, there is a little note about
not having them in the 598 size and to use the other.

http://www.shotimes.com/brakes/survey/brakes4.html


Mike Wojton
Toledo, Ohio

-'95 Green MTX  3/01-1/03
   ShoShop y-pipe

-'95 White MTX
   '96 Brake Upgrade

"Avoid the clap." - Jimmy Dugan




"Ron Porter" <ronporter@prodigy.net> wrote on 07/01/2003 10:29:51 AM:

> No, those are the smaller '94-95 front pads that do fit the caliper, but
> defeat part of the purpose of the '96 upgrade.
> 
> The FAQ brake survey says to use 601 pads?? Flat-ass wrong!!
> 
> AZ doesn't carry any decent pads in the 598 size.
> http://www.nationalfleetparts.com/performance_friction.asp has the 
correct
> PFCM 598 pad (look under '97 Tbird Super Coupe), but going mail-order 
opens
> it up to Ford pads, Porterfields, EBC from Tire Rack, etc.
> 
> Ron Porter 
> 
> -----Original Message-----
> From: shotimes-admin@autox.team.net 
[mailto:shotimes-admin@autox.team.net]
> On Behalf Of Mike.Wojton@us.o-i.com
> Sent: Tuesday, July 01, 2003 9:28 AM
> To: shotimes@autox.team.net
> Subject: [Shotimes] 96+ PFCM brake pads
> 
> 
> I apologize if this has been brought up recently.
> 
> Autozone doesn't carry the PFCM brake pads for the 96 SHO brakes.
> The brake survey on the FAQ says to use #6014 pads.  Is this a good
> thing?  Are these the correct size for these rotors?
> 
> 
> Mike Wojton
> Toledo, Ohio
> 
> -'95 Green MTX  3/01-1/03
>    ShoShop y-pipe
> 
> -'95 White MTX
>    '96 Brake Upgrade
> 
> "Avoid the clap." - Jimmy Dugan
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes