[Shotimes] Porterfield R4S Question

[Steve Tatro]

I've had problems in the past with PFCM pads and AutoZone rotors.

A few months ago I tried it one more time, and used this procedure
http://www.baer.com/Support/TechTips.aspx?TechTipID=4.

My new brake setup, properly seasoned, is performing flawlessly.  I've
very happy with it.

Later,

Steve Tatro 
Red/Black '93 with 168k miles 
Cincinnati, Ohio 



-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of bobsteig@att.net
Sent: Tuesday, July 08, 2003 10:19 AM
To: shotimes@autox.team.net
Subject: [Shotimes] Porterfield R4S Question


I'm putting PFCM pads on my '89 today. (stock, not upgraded) Rotors are
being 
re-surfaced. What is the 'bedding' procedure please? I remember it being

mentioned about 2 months ago. Was it 2 or 3 hard stops from 60 MPH?

TIA, BB-NYC '89 
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes