[Shotimes] Serpentine Belt came off

[van Oss]

Find the forward belt tensioner (also called idler pulley).  It should be
shiny.  Loosen the nut in the center of it.  Just above it, there's a 5mm
hex-head; turn that to raise the pulley enough to slip the belt back on.

Check if coolant is leaking from under the water-pump pulley.  Is so, it
might be coming from the weep hole in the pump.  In which case, you're about
to buy a pump.

Joseph van Oss




----- Original Message -----
The belt on the left side of my motor came off, I had a small coolant leak
that was leaking onto the pulleys and was driving home to attempt to look at
it,
and my belt came off and the temp guage rose very quickly. Am i going to
have
to get it towed to the mechanic or is there any easy way I can get it back
on?

Kent 91+ White MTX
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes