[Shotimes] Link to Sway bar info?

[Carl Prochilo]

Good webpage.  Dave, John H.'s stuff is in there, although I believe some
people have issues with the write-up so it isn't universally accepted.

The data on the 92 looks to be correct.  I will more specifically state that
when Don D installed the Poly bushings on my front subframe, he used an
electronic caliper tool to measure the sway bar size and it came in at a
whopping 24.6mm.  Earlier in the life of my SHO I had installed a 26mm in
the rear with poly bushings.

Bruce, I can tell you from my experience that the 24mm/26mm is a safe setup
and the car will still understeer under most circumstances.

Cheers,
Carl Prochilo
92 Ultra Red Crimson
----- Original Message ----- 
From: "Dave Kegel" <d.kegel@comcast.net>
To: "SHOtimes Mailing List" <shotimes@autox.team.net>
Sent: Friday, July 11, 2003 10:51 AM
Subject: Re: [Shotimes] Link to Sway bar info?


> There is some sway bar stuff here, but there's another page (maybe it was
> email) that John Hrinsin put together with all the combinations and
ratios.
>
> http://www.panix.com/~awinbow/sho/suspension.html
>
> Dave
> ----- Original Message -----
> From: "Bruce Malachuk" <bmalach1@nycap.rr.com>
> To: "SHOtimes" <shotimes@autox.team.net>
> Sent: July 11, 2003 9:43 AM
> Subject: [Shotimes] Link to Sway bar info?
>
>
> > Anyone have the link to the page that has a listing of our sway bar
> combos?
> > I'm adding my 24/26 today but was wondering if it might be too much on
my
> car
> > for use at Blackhawk.
> >
> > I think I have a 19 up front and a 21 in the back on my 94 MTX. Gotta
> break
> > out the digital caliper and make sure.
> >
> > Bruce
> > 94 Opal Frost MTX
> > 93 Black ATX - winter beater then parts car :-)
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes