[Shotimes] Link to Sway bar info?

[Dave Kegel]

Ian,

The '94 MTXs came with them as well.  Several people have confirmed that.

Dave
----- Original Message -----
From: <ianf@eden.rutgers.edu>
To: <ronporter@prodigy.net>; <bmalach1@nycap.rr.com>;
<shotimes@autox.team.net>
Sent: July 11, 2003 10:51 AM
Subject: RE: [Shotimes] Link to Sway bar info?


> 93 was the last year that 24mm FSB's were stock on the mtx's. He most
> likely has a 20.6 on there.
>
> Ian
>
> > If your '94 is stock, I'll bet it already has the 24mm front bar. Get
> under
> > there and measure that bar to make sure. If need be, NAPA carries the
> rubber
> > 24mm bushings.
> >
> > SHO Nut carries the poly front bushings with Josh's grease fitting
> setup.
> > You might try & contact him and bring it to the Convention, but I
> seriously
> > doubt that you need it, as I believe you already have the 24mm front
> bar on
> > the car.
> >
> > Ron Porter
> >
> >
> >
> > -----Original Message-----
> > From: Bruce Malachuk [mailto:bmalach1@nycap.rr.com]
> > Sent: Friday, July 11, 2003 11:19 AM
> > To: Ron Porter; 'SHOtimes'
> > Subject: Re: [Shotimes] Link to Sway bar info?
> >
> >
> > I might not even get the front bar on today. I can't seem to find
> anyplace
> > that has the 24mm sway bushings in stock from ES. I might see if I
> can pick
> > them up somewhere out towards the convention and just do some work in
> the
> > parking lot. I'm sure others will. I am changing my rear bar to the 26
> > today, cause the stock one on there sucks really really bad with my
> mods.
> > Plus I have nice new TPR for the rear.
> >
> >
> > ----- Original Message -----
> > From: "Ron Porter" <ronporter@prodigy.net>
> > To: "'Bruce Malachuk'" <bmalach1@nycap.rr.com>; "'SHOtimes'"
> > <shotimes@autox.team.net>
> > Sent: Friday, July 11, 2003 11:01 AM
> > Subject: RE: [Shotimes] Link to Sway bar info?
> >
> >
> > > My '94 MTX, as well as others I've talked to, all have the 24/23
> (F/R)
> > > combo.
> > >
> > > I am running 24/26 now, it is not "too much". Properly driven it
> will work
> > > just fine. The greater bar differentials F/R help the car pivot
> better at
> > > lower speeds, as in autocross.
> > >
> > > I received a 22mm front bar from Russ McCoy, but I'm not putting it
> on for
> > > Blackhawk. I'll try it with the 26mm rear bar later on. I'm curious
> to see
> > > how this '94 does with the 24/26 and the long SFCs. The setup is
> basically
> > > identical to my former '95, the only difference being the SFCs on
> this
> > car.
> > >
> > > Note in advance. If you feel that the car is plowing too much at the
> > track,
> > > chances are you are coming into a curve/turn too hot, and may be on
> the
> > > brakes while you are steering. Come in slow, brake in a straight
> line, and
> > > power it hard on the way out.
> > >
> > > Ron Porter
> > >
> > > -----Original Message-----
> > > From: shotimes-admin@autox.team.net [mailto:shotimes-
> admin@autox.team.net]
> > > On Behalf Of Bruce Malachuk
> > > Sent: Friday, July 11, 2003 10:43 AM
> > > To: SHOtimes
> > > Subject: [Shotimes] Link to Sway bar info?
> > >
> > >
> > > Anyone have the link to the page that has a listing of our sway bar
> > combos?
> > > I'm adding my 24/26 today but was wondering if it might be too much
> on my
> > > car
> > > for use at Blackhawk.
> > >
> > > I think I have a 19 up front and a 21 in the back on my 94 MTX.
> Gotta
> > break
> > > out the digital caliper and make sure.
> > >
> > > Bruce
> > > 94 Opal Frost MTX
> > > 93 Black ATX - winter beater then parts car :-)
> > > _______________________________________________
> > > Shotimes mailing list
> > > Shotimes@autox.team.net
> > > http://www.team.net/mailman/listinfo/shotimes
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes