[Shotimes] Link to Sway bar info?

[Bruce Malachuk]

my production date is 5/94 i think. I had my digital caliper out there with
me today, and also wanted to check the thickness on my freshly PC'd 24/26
sways.

There is another Opal Frost MTX here in town and I'm gonna throw my caliper
on his bar later tonigth.

Bruce

----- Original Message ----- 
From: "Dave Kegel" <d.kegel@comcast.net>
To: "Bruce Malachuk" <bmalach1@nycap.rr.com>; <shotimes@autox.team.net>
Sent: Friday, July 11, 2003 4:35 PM
Subject: Re: [Shotimes] Link to Sway bar info?


> I'm assuming you just recently went out and measured it?  Any idea what
your
> build date is?  I know Kurt's (with a 24mm bar) is a very early '94.  His
> production date is about 1 month later than that of my '93.
>
> Dave Kegel
> ----- Original Message -----
> From: "Bruce Malachuk" <bmalach1@nycap.rr.com>
> To: "Ron Porter" <ronporter@prodigy.net>; <ianf@eden.rutgers.edu>;
> <shotimes@autox.team.net>
> Sent: July 11, 2003 3:25 PM
> Subject: Re: [Shotimes] Link to Sway bar info?
>
>
> > I have a 20.6mm stock bar in the front.