[Shotimes] strange SHO engine on ebay

[Noah South III]

Well that's easy enough with a SHO motor, just remove the
plugs........................... <G>

-Noah South III


----- Original Message -----
From: "Jim and Debbie Leyden" <jndleyden@mindspring.com>
To: "Epperly" <epperly1@optonline.net>; <shotimes@autox.team.net>
Sent: Friday, July 18, 2003 1:01 PM
Subject: RE: [Shotimes] strange SHO engine on ebay


> I think what he was saying was to fill a cylinder with oil and measure the
> volume.
>
> Jim
> '93 MTX
> '91 Plus
>
>
>
> -----Original Message-----
> From: shotimes-admin@autox.team.net
> [mailto:shotimes-admin@autox.team.net]On Behalf Of Epperly
> Sent: Friday, July 18, 2003 11:55 AM
> To: shotimes@autox.team.net
> Subject: Re: [Shotimes] strange SHO engine on ebay
>
>
> Flash rust. If it was a 89 then it would have a small flywheel. Serious
> doubt that only one would be made from a new casting. Look at the trouble
> the SHO SHOP has to make a larger displacement with the regular block. If
> you know nothing about SHO motors you could be told anything. You might be
> able to tell the stroke of the motor through the plug hole but not the
bore.
>
>         Ken
>
> Subject: Re: [Shotimes] strange SHO engine on ebay
>
>
> > Why is the flywheel and part of the block behind it (carrier gasket
area)
> > all red?
> > Can't tell if it's rust or not...
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes