[Shotimes] EGR tube

[sho2go]

Yes, there are 2 small tubes off the ATX assembly, only one off the MTX.
But the main tube looks like it might be the same sizeand shape, shielded
instead of covered with an asbestos braid.  One could probably plug up one
of the tubes in order to use the ATX assy. in the MTX car.
Mike

----- Original Message ----- 
From: "Chris Locker" <blindguy@gbronline.com>
To: "John Weidenbenner" <johnjweid@earthlink.net>; "SHOtimes"
<SHOtimes@autox.team.net>
Sent: Tuesday, July 22, 2003 2:37 PM
Subject: Re: [Shotimes] EGR tube


> I believe all of the MTX SHO's that have EGR installed use only one
feedback
> line to the PFE sensor where all of the ATX SHO's have a DPFE sensor that
> uses two feedback lines.  So the EGR tubes are not the same.
>
> Chris Locker
> President SHOklahoma
> Red '98 "welded cams"
>
>
> ----- Original Message ----- 
> From: "John Weidenbenner" <johnjweid@earthlink.net>
> To: "'*_SHOTIMES II'" <shotimes@autox.team.net>
> Sent: Tuesday, July 22, 2003 1:27 PM
> Subject: Re: [Shotimes] EGR tube
>
>
> > The CA 89 SHO has a different erg system design than my 93 atx. The
design
> > may have been standardized some time after the 89 model year.
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes