[Shotimes] Oxygen sensors

Steve Weinrich stevwein@swbell.net
Mon, 28 Jul 2003 12:53:22 -0500


RH is the firewall one.  It's real fun to replace. Skinny arms and small
hands help for getting to the connector  The front one is a snap.

The only difference between the different Bosch sensors listed is the length
of the harness.  If you use the longer harness version, use a tiewrap to tie
the harness out of the way of anything important.

Replacing both makes sense.

Steve

----- Original Message -----
From: "Paul L Fisher" <sho@paul-fisher.com>
To: "SHOtimes (Team.net)" <shotimes@autox.team.net>; "TechSHO (Topica)"
<TechSHO@topica.com>
Sent: Monday, July 28, 2003 12:40 PM
Subject: [Shotimes] Oxygen sensors


> I got a code 172 which means "HEGO sensor indicates system lean (RH)".
Which
> one is the RH?
>
> Looking at www.autozone.com, they say that the Bosch 15716 is the "OE
Type"
> with a 8 1/2" wire. It also says I can use the 15717 (13") or 15718 (16
> 1/2").
>
> Any suggestions? I might just replace both.
>
> Paul L Fisher
> '93 Ford Taurus SHO Crimson Clearcoat ATX 175K Build date 11/18/1992
> - K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back,
Holley
> 190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus
> Stainless Steel Y-pipe, '96 brake upgrade, Proportioning valve plugs,
Delrin
> sub-frame bushings, Amsoil Series 2000 0W-30 oil, Amsoil Synthetic ATF.
>
> SHO Club member http://www.shoclub.com/
> Check out my web site http://www.paul-fisher.com/
> Amsoil dealer http://www.paul-fisher.com/oil.htm
>
> Get $5 free from PayPal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6
>
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.504 / Virus Database: 302 - Release Date: 7/25/2003
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes