[Shotimes] Oxygen sensors
Ron Childs
rbchilds@pacbell.net
Mon, 28 Jul 2003 11:40:16 -0700 (PDT)
That would be the rear one. On the right if you are facing the same way the engine is (i.e. toward the passenger side.) Oh, and let's not start that thread again (you know what I'm talking about :-)
-Ron Childs '91
Paul L Fisher <sho@paul-fisher.com> wrote:
I got a code 172 which means "HEGO sensor indicates system lean (RH)". Which
one is the RH?
Looking at www.autozone.com, they say that the Bosch 15716 is the "OE Type"
with a 8 1/2" wire. It also says I can use the 15717 (13") or 15718 (16
1/2").
Any suggestions? I might just replace both.
Paul L Fisher
'93 Ford Taurus SHO Crimson Clearcoat ATX 175K Build date 11/18/1992
- K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back, Holley
190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus
Stainless Steel Y-pipe, '96 brake upgrade, Proportioning valve plugs, Delrin
sub-frame bushings, Amsoil Series 2000 0W-30 oil, Amsoil Synthetic ATF.
SHO Club member http://www.shoclub.com/
Check out my web site http://www.paul-fisher.com/
Amsoil dealer http://www.paul-fisher.com/oil.htm
Get $5 free from PayPal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.504 / Virus Database: 302 - Release Date: 7/25/2003
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes