[Shotimes] Stage 1 cams
Don McKinnon (AST)
dmckinnon@asttechlabs.com
Mon, 28 Jul 2003 23:46:52 -0400
Heck, I hope your setup is tighter than mine as I don't think some of the
shims I used are available anymore! Here are the shims I needed for my
Stage 1 cams:
Rear exhaust - 2625&2600, 2650&2650, 2675&2600
Rear Intake - 2325&2325, 2375&2375, 2450&2450
Front Intake - 2425&2425, 2400&2475, 2475&2450
Front exhaust - 2775&2800, 2775&2675, 2700&2675
It was reported that the cams are ground by hand, how I do not know nor do I
wish too at this point.
Don McKinnon
95 MTX - White/Mocha 92k miles
Stage 1 Power Package with Stage 1cams
Canyon Carver Road/Race Suspension
Quaife & HiRevs Competition Clutch
-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]On Behalf Of Kirk Doucette
Sent: Monday, July 28, 2003 10:54 PM
To: van Oss; shotimes@autox.team.net
Subject: RE: [Shotimes] Stage 1 cams
But did you get the right Lash caps, and Shims? Wait until you see how "all
over the place" your clearances become once you add them.
Kirk J Doucette
NESHOC President
Stormtrooper-97 White
-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]On
Behalf Of van Oss
Sent: Monday, July 28, 2003 6:50 PM
To: shotimes@autox.team.net
Subject: [Shotimes] Stage 1 cams
I've received a set of Stage 1 cams. Have to decide which SHO to put them
in. Opinions?
-- 92 is mostly track, some street. 75K, stored winters, plenty of mods.
-- 91 is year-round driver and auto-crosser. 140K, a few mods (MAF,
cat-back, suspension).
Do Stage 1 cams help at low or high RPMs? That's probably the crucial
factor.
Joseph van Oss
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes