[Shotimes] Re: GEN I Caliper Rebuilding

[Christian Andretta]

I would like to get them powder coated.  In order to do that all of the
seals have to be removed form the caliper which would require dissaembly and
re-installation..  I would like to have spare materials on hand.

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]On Behalf Of Paul L Fisher
Sent: Tuesday, July 29, 2003 11:25 PM
To: TechSHO@topica.com; shotimes@autox.team.net
Subject: [Shotimes] Re: GEN I Caliper Rebuilding


Why go through the hassle yourself? Get lifetime warranty Autozone ones
instead. I never even bother messing with screwing the piston in anymore. I
pop off the old calipers, go to Autozone and get new ones every time I need
to change my pads. I figure I'm there getting my replacement free pads
anyway.

Paul L Fisher
'93 Ford Taurus SHO Crimson Clearcoat ATX 175K Build date 11/18/1992
- K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back, Holley
190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus
Stainless Steel Y-pipe, '96 brake upgrade, Proportioning valve plugs, Delrin
sub-frame bushings, Amsoil Series 2000 0W-30 oil, Amsoil Synthetic ATF.

SHO Club member http://www.shoclub.com/
Check out my web site http://www.paul-fisher.com/
Amsoil dealer http://www.paul-fisher.com/oil.htm

Get $5 free from PayPal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6

----- Original Message -----
From: "Christian Andretta" <passport@optonline.net>
To: <shotimes@autox.team.net>; "Tech" <TechSHO@topica.com>
Sent: Tuesday, July 29, 2003 9:05 PM
Subject: GEN I Caliper Rebuilding


> I have a set of GEN I rear calipers that I have to rebuild.  I have tried
> all of my local part houses and none of them sell re-build kits for them.
> Is there a reputable on-line source that sells a kit?   Is the procedure
for
> rebuilding these calipers the same as the front?  I am assuming that
because
> of the parking brake mechanism there a some additonal steps to
disassembly.
> Last thing I promise:  Do you think the cadmium coating on rebuilt
calipers
> will last very long or should I powder coat them instead?
>
> Christian Andretta
> 99 SF
>
> --^----------------------------------------------------------------
> This email was sent to: sho@paul-fisher.com
>
> EASY UNSUBSCRIBE click here: http://topica.com/u/?b1dhxA.b3gij5.c2hvQHBh
> Or send an email to: TechSHO-unsubscribe@topica.com
>
> TOPICA - Start your own email discussion group. FREE!
> http://www.topica.com/partner/tag02/create/index2.html
> --^----------------------------------------------------------------
>
>
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.504 / Virus Database: 302 - Release Date: 7/24/2003
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes