[Shotimes] Strut Housings for Konis?

[Bill Murray]

Don't forget that there are 2 different Koni models for the rears,
depending on which housings you use.  The gen 1 and early 92 housings
give the most suspension travel, and are the preferred ones to use of a
lot of people on the list.  The later model struts reduced travel by
about a half inch I think.  So before you get new strut housings, you
should figure out which Konis you have first.

Bill Murray

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Bruce Malachuk
Sent: Tuesday, June 03, 2003 12:24 PM
To: SHOtimes
Subject: [Shotimes] Strut Housings for Konis?

I know I have read a few things on the shoforum about the "best" strut
housings to use, but I figured that here is usually a much better source
of
knowledgeable info that I'd ask. I have a set of konis that are already
in
inserts, but they are cut kinda short on the rears so I was thinking
about
looking for new housings before the install. From what I have read the
93-94
Gold topped ones are the ones to get. But any other info would be
helpful. I'm
thinking about just finding one housing and cutting some pieces of the
tube to
have welded onto what I have so that I can extend the length, but then
again
it may be easier for someone like myself without a welder to just get
some
other housings.

If anyone can hit me up with the details it would be much appreciated.

Bruce
94 Opal Frost MTX
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes


---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.486 / Virus Database: 284 - Release Date: 5/29/2003
 

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.486 / Virus Database: 284 - Release Date: 5/29/2003