[Shotimes] New SHO Parts fresh off the truck

[Kirk Doucette]

Get the sable hood and cut the center support bar out, and save a few Lbs
there. Some of the cheap aftermarket companies are doing that. I saw it on a
red one this past weekend

Kirk J Doucette
NESHOC President
Stormtrooper-97 White

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]On
Behalf Of Mark Nunnally
Sent: Friday, June 06, 2003 6:23 PM
To: shotimes
Subject: Re: [Shotimes] New SHO Parts fresh off the truck

> Going from memory, a Gen1 hood is about 65 lbs, Gen 2 is 50.  I'm sure the
> Gen3 hood is at least 50. Gen1 Plus hood is 45-ish I think?  Mark Nunnally
> knows for sure.

I forget :)

plus is 42.5 lb, the steel gen1 is 50.  I seem to remember the gen2 being a
tick lighter but maybe it's not.  maybe it's 50 as well.

I do know the plus is 7.5 lbs lighter than the steel.

somebody needs to make an 8 lb carbon fiber plus look alike <VBG>

mark
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes