[Shotimes] Ground cables for power?

[George Fourchy]

On Sat, 7 Jun 2003 01:49:07 -0500, Ron DeReus wrote:

>From the lack of responses except yours and Don's, the original
>equipment set up must be optimal. 

They work pretty well until the ends get replaced, for whatever reason.  Then
problems begin to crop up with power not being supplied to the PCM through the small
wire that comes off the terminals adjacent to the cables that go to ground and to
the solenoid.  Problems with not starting and quitting while running can be caused
by poor connections to the battery with these small wires.

Clamp-on replacement terminals for the cables do not adequately solve the
problem....new terminals with the proper small wires fatory installed are what will
prevent the stalling and quitting. 

George