[Shotimes] express up

[Al Fitz]

I have instructions and photos on my website.

Al Fitz SHO Specials
http://www.alfitz.com

NOTE: When replying to this email, please use your 'REPLY' button to include
the original message.



----- Original Message ----- 
From: "Kevin M. Bisch" <kevin624@bellatlantic.net>
To: "van Oss" <vanOss@centurytel.net>; "Kirk Doucette"
<Kirk.doucette@verizon.net>; <shotimes@autox.team.net>
Sent: Saturday, June 07, 2003 9:30 PM
Subject: Re: [Shotimes] express up


> Where can I find three modules?? Go digging through Taurii at the
> graveyard? Does anyone have a photo of what this unit looks like?
>
> --Kevin
>
> At 09:08 PM 6/7/2003 -0500, van Oss wrote:
> >I'm not saying this is the best way to do this, but it's the only way I
> >know.  With 3 express modules, you could give the driver "express down"
AND
> >"express up" on both front windows.  I'll give the instructions in terms
of
> >Gen2 wiring; update the wire colors yourself per EVTM.
> >
> >1.  Label your modules LEFT FRONT UP, LEFT FRONT DOWN, RIGHT FRONT UP,
and
> >RIGHT FRONT DOWN.
> >
> >2.  Study your modules.  Modules have fives wires.  Two of the connector
> >pins
> >are heavier gauge, and three are lighter.  If you hold the module so that
> >the heavier pins are on the left and the lighter ones on the right, you
are
> >looking at pins 1-5 left to right.  Wire #1 is red, #2 is white/black, #3
> >depends on year (see note), #4 is yellow, and #5 is black.  Strip about
1/2"
> >insulation from the end of each wire.
> >
> >         NOTE:  If your module came from a 92, the center #3 wire will be
> >light-blue/black.  If it came from a 93-95, the center wire will be
> >yellow/green.  Either way it works fine, just be mindful of the colors as
> >you proceed.  The 92 module is actually closer to the wire colors of Gen1
> >cars.  One more proof that 92s have Gen2 bodies and Gen1 souls.
> >
> >3.  Remove keys from ignition.  Remove the driver's door window switches.
> >Pull the switch assembly out from the opening as far as you can; it won't
be
> >much.
> >
> >4.  Find the light-blue/black wire (identified as #400 in the EVTM).  A
few
> >inches away from the switch, strip a little insulation from this wire.
> >Splice into it the center #3 wire on all of your express modules
> >(light-blue/black or yellow/green).  Use whatever splicing technique you
> >like.  Wrap in shrink-wrap or tape to insulate.
> >
> >5.  Find the black wire on the switch (identified as #57 in the EVTM).  A
> >few inches away from the switch, strip a little insulation from this
wire.
> >Splice into it the #5 wire on all of your express modules (black).
> >
> >6.  Repeat three times  -- Find the TARGET wire on the switch for the
> >direction you want to express:
> >
> >         - #333 LEFT FRONT UP, yellow with red stripe
> >         - #313 RIGHT FRONT UP, white with yellow stripe, or yellow with
> >black stripe
> >         - #314 RIGHT FRONT DOWN, tan with light blue stripe, or red with
> >black stripe
> >
> >     Cut the wire through.  Strip 1/2" insulation from each end.  To the
> >piece of this wire that goes down into the door, connect the red #1 wire
on
> >your express module.  To the piece of this wire that comes from the
switch,
> >connect the white/black #2 wite on your express module.
> >
> >KEEP TRACK OF WHICH MODULE IS CONTROLLING WHICH WINDOW AND DIRECTION
> >
> >7.  Repeat three times  -- Find the OPPOSITE DIRECTION wire on the switch
> >from the direction you want to express:
> >
> >         - #334 LEFT FRONT DOWN, red with yellow stripe
> >         - #314 RIGHT FRONT DOWN, tan with light blue stripe, or red with
> >black stripe
> >         - #314 RIGHT FRONT UP, white with yellow stripe, or yellow with
> >black stripe
> >
> >     Splice into this wire the #4 wire on your express module (yellow).
> >
> >8.  Flip your window switch assembly right-side up.  Insert the key into
the
> >ignition and turn to RUN or ACC.  Verify that the "one-touch" feature
works
> >as intended.
> >
> >9.  Tuck the one-touch modules into the opening in the door cover panel.
> >_______________________________________________
> >Shotimes mailing list
> >Shotimes@autox.team.net
> >http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes