[Shotimes] water pump

[BJamesjr@aol.com]

> could someone please tell me where in the archives i can find the information 
> on changing a water pump, or, if possible send me the by 
> the number steps on this process. 

On a gen1 (MTX) it is not difficult.  I don't know if the ATX engine is significantly different.

On the gen1 you basically remove the battery, anti-roll brace between the engine and fender, accessory belts and accessory belt idlers, and upper cam covers.  Then you can remove the water pump.  Have your mechanic study it then start taking parts off.  He can figure it out pretty easily.

Get your new water pump before removing the old one.  Some places sell you the entire pump, front and back housings.  Other places give you only the front part of the housing.  You don't have to disturb the rear o-ring if you just replace the front of the housing.  There is also a long snout that goes to the lower radiator hose.  If I remember right you either separate this from the water pump or you have to remove the timing belt to get it out.