[Shotimes] Aftermarket KYB Struts?

Don McKinnon (AST) dmckinnon@asttechlabs.com
Wed, 11 Jun 2003 17:25:52 -0400


Those small bars makes for some good understeering, who cars about body roll
when it keeps going straight <LOL>!

remember this from John Hrinsin awhile back...
----------
...
24mm/23mm    1.34 you have got to be kidding

19mm/19mm     1.13     girlie mahn
20.6mm/21mm     1.04
22mm/23mm          .94

26mm/28mm         .84         safe predictable understeer
24mm/26mm         .82
19mm/21mm         .75
20.6mm/23mm      .72

24mm/28mm         .61         good overall balance
22mm/26mm         .58

19mm/23mm         .52        Gen III optimal

20.6mm/26mm      .44        on the tail happy side
22mm/28mm         .42

20.6mm/28mm      .33        sick oversteer
19mm/26mm         .32

19mm/28mm         .24         yeah, right

Sway bar bushings material, spring rates, strut type, settings and mounts,
degree of unibody stiffing, sub frame bushing material and differential
type all have an effect on the above. ..
-----

Don McKinnon

-----Original Message-----
From: Carl Prochilo [mailto:gr8sho@prochilo.myserver.org]
Sent: Wednesday, June 11, 2003 4:57 PM
To: Don McKinnon (AST); shotimes@autox.team.net
Subject: Re: [Shotimes] Aftermarket KYB Struts?


Wow, 4mm sounds like a big difference.  It's hard for me to quantify it
though because the 95 has the VAPS that I had read so much about and now can
experience for myself.  The steering just feels altogether different.  It's
nice in one sense when doing ultra low speed maneuving, but it feels so
wimpy compared with my 92.  I suppose I could get used to it, but haven't
yet.  My son likes it better than my car, so that is a good thing (as
jailbird Martha says).

Carl

----- Original Message -----
From: "Don McKinnon (AST)" <dmckinnon@asttechlabs.com>
To: "Carl Prochilo" <gr8sho@prochilo.myserver.org>;
<shotimes@autox.team.net>
Sent: Wednesday, June 11, 2003 4:42 PM
Subject: RE: [Shotimes] Aftermarket KYB Struts?


> No differences that I've seen.  My old 94 ATX and 95 MTX, along with 2
other
> 95's (ATX and MTX) I worked on had a 20.6mm front bar with a 21mm rear
bar.