[Shotimes] Aftermarket KYB Struts?

[Ron Porter]

My '95 had the 20.6-21MM (somewhere in that vicinity) bars front and rear.
Every '95 I've heard about, ATX or MTX, has these bamboo sticks for bars.

Calipers are cheap at Home Depot, except they don't do metric (!!!) so you
have to convert. Doesn't matter, an eyeball calibration tells you that the
'95 bars are pretty wimpy.

Ron Porter 

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Carl Prochilo
Sent: Wednesday, June 11, 2003 4:36 PM
To: Dave Kegel; shotimes@autox.team.net
Subject: Re: [Shotimes] Aftermarket KYB Struts?


Don D. measured the front anti-sway bar on my 92.  It rang up at 24.6mm.  I
had already upgraded the rear bar on my 92 to a 26mm.

The bar on the 95 looks to be stock.  I'll have to use a C-clamp or some
other tool to measure it to be sure, but what is the normal size I should
expect to see on a 95 MTX?  I thought the ATX and MTX were different in this
area, the former getting a softer suspension.

Carl
----- Original Message ----- 
From: "Dave Kegel" <d.kegel@attbi.com>
To: <shotimes@autox.team.net>
Sent: Wednesday, June 11, 2003 3:48 PM
Subject: Re: [Shotimes] Aftermarket KYB Struts?


> Since it's a '95 it's most likely got the standard Taurus springs, which
> will work with about any strut.  KYBs are not a good match to the earlier
> heavier rate SHO-specific springs.  You might want to measure the sway
bars
> and see if they've been changed.
>
> Dave
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes