[Shotimes] Gen1 & Gen2 Rear-Brakes(Larger or Smaller)

[Christian Andretta]

Did the GEN 1 SLO's have rear disc brakes?

-----Original Message-----
From: Kirk Doucette [mailto:Kirk.doucette@verizon.net]
Sent: Friday, June 13, 2003 4:24 PM
To: ianf@eden.rutgers.edu; Johnsho92; Christian Andretta; Steve
Weinrich; shotimes@autox.team.net
Subject: RE: [Shotimes] Gen1 & Gen2 Rear-Brakes(Larger or Smaller)


You don't need the hub. You only need the backing plate from a 89-92 along
with the hardware you want to install. The backing plate is help on by 4
15mm bolts.

Kirk J Doucette
NESHOC President
Stormtrooper-97 White

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]On
Behalf Of ianf@eden.rutgers.edu
Sent: Thursday, June 12, 2003 6:46 PM
To: Johnsho92; Christian Andretta; Steve Weinrich; shotimes@autox.team.net
Subject: RE: [Shotimes] Gen1 & Gen2 Rear-Brakes(Larger or Smaller)

you need the earlier spindle/hub because the mounting holes on said
unit are different than the later years.

Ian
91 rear setup sitting in my shed.
update: motor out of the bedroom and in the shed.



> So I would need the Caliper and Bracket, how about the
> Hub assembly?
>
> -John
>
>
> --- Christian Andretta <passport@optonline.net> wrote:
> > If I remmeber correctly the earlier caliper will not
> > match up with the rotor
> > correctly.  The GEN I rotor is larger, venter and
> > slightly heavier.  If you
> > were to do this in order to use the GEN 1 rotor you
> > will need among other
> > things the GEN 1 caliper bracket (to fit the vented
> > rotor.  Since you have
> > both try doing a dry fit.
> >
> > Chris A
> > 99 SF
> >
> > -----Original Message-----
> > From: shotimes-admin@autox.team.net
> > [mailto:shotimes-admin@autox.team.net]On Behalf Of
> > Johnsho92
> > Sent: Thursday, June 12, 2003 5:43 PM
> > To: Steve Weinrich; shotimes@autox.team.net
> > Subject: [Shotimes] Gen1 & Gen2 Rear-Brakes(Larger
> > or Smaller)
> >
> >
> > Hello,
> >
> > Some time ago, I have my 92'MTX Rear brakes planted
> > into a 1993-MTX.  I noticed that the Brake Pads off
> > the 1992 were wider and bigger?  Thus More surface
> > area to grip the rotor with.
> >
> > Would this require the whole Wheel/Hub and all?  Is
> > it
> > really better?  what are your thoughts?  Thanks.
> >
> >
> > I now have a 1995MTX and want to replace the brakes,
> > should I go buy a set for a 1990 for my 1995mtx?
> >
> > Thanks all.
> >
> > -John.
> >
> >
> > __________________________________
> > Do you Yahoo!?
> > Yahoo! Calendar - Free online calendar with sync to
> > Outlook(TM).
> > http://calendar.yahoo.com
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> >
> >
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Calendar - Free online calendar with sync to Outlook(TM).
> http://calendar.yahoo.com
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes