[Shotimes] FSB endlinks

[Steve Weinrich]

Damn, I wish I had thought of that!

Steve
----- Original Message -----
From: "Christian Andretta" <passport@optonline.net>
To: <shotimes@autox.team.net>
Sent: Friday, June 13, 2003 2:04 PM
Subject: RE: [Shotimes] FSB endlinks


> Save your old ones, two months from the purchase date of the new set
return
> the old ones as defective.
>
> Chris A
> 99 SF
> -----Original Message-----
> From: shotimes-admin@autox.team.net
> [mailto:shotimes-admin@autox.team.net]On Behalf Of Steve Weinrich
> Sent: Friday, June 13, 2003 8:16 AM
> To: shotimes@autox.team.net
> Subject: Re: [Shotimes] FSB endlinks
>
>
> Yeah, the Moog ones are made like that.  They are listed as "Problem
> Solvers"
>
> The TRW ones are the plastic ones.
>
> FWIW, I bought a pair of the plastic ones from AutoZone.  The joints
failed
> in about 13 months and the AZ warranty was only 3 months.
>
> Since I didn't have time to order the Moog ones, I ended up buying yet
> another pair of the plastic ones from AZ....grrrrrr  When these fail, I'm
> going to the Moogs.
>
> Steve W
>
> ----- Original Message -----
> From: "James White" <greensho@crown.net>
> To: "Nathan Brown" <nkb5f@hotmail.com>; <shotimes@autox.team.net>
> Sent: Friday, June 13, 2003 12:37 AM
> Subject: Re: [Shotimes] FSB endlinks
>
>
> > I would also like to hear some comments about these end links, because I
> > just got a pair for the '93MTX and they were steel with grease fittings!
> > Moog parts. I thought that all of these things were glass re-inforced
> nylon.
> >
> > Jim White - greensho@crown.net
> > Valparaiso, Indiana
> > '93  5 SPEED   279k few mods
> > '95  5 SPEED   248k lots of mods
> > "double clutch"  it's good for both you and your SHO
> >
> >
> > ----- Original Message -----
> > From: "Nathan Brown" <nkb5f@hotmail.com>
> > To: <shotimes@autox.team.net>
> > Sent: Thursday, June 12, 2003 8:31 AM
> > Subject: [Shotimes] FSB endlinks
> >
> >
> > > Hey everybody,
> > >
> > > I'm in need of a new set of endlinks for my front sway bar. SHOnut has
> > them,
> > > but it looks like they're for the Windstar. I know the dimensions are
> the
> > > same as the Taurus, but apparently the windstar links are aluminum
> instead
> > > of the white composite material found on the Taurus.
> > >
> > > To those who have them, are the windstar endlinks just as good
(strong,
> > > resilient, etc..) as the composite Taurus links?
> > >
> > > Thanks,
> > >
> > > Nathan
> > >
> > > _________________________________________________________________
> > > STOP MORE SPAM with the new MSN 8 and get 2 months FREE*
> > > http://join.msn.com/?page=features/junkmail
> > > _______________________________________________
> > > Shotimes mailing list
> > > Shotimes@autox.team.net
> > > http://www.team.net/mailman/listinfo/shotimes
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes