[Shotimes] no spark

[John Weidenbenner]

The DIS must be mounted to complete the ground side of the circuit. The
bolts holding the crossover must also be in place.

John W.
----- Original Message -----
From: "-Newmy-" <thenewmster@shaw.ca>
To: <shotimes@autox.team.net>
Sent: Thursday, June 19, 2003 9:09 PM
Subject: [Shotimes] no spark


> Hey gang, hope everyone is well.
> quick question.
> for the last few days, the '90 sho would cut out for about 2 seconds, then
go again.
> today it died completely, so I checked around under the hood, and found
that the wire from my DIS that feeds my 5" monster tach had shorted to
ground. I repaired it and drove it for about 3 hours after that.
> then about an hour ago, it died completely, never to have spark again. I
ran home and threw in another DIS, but to no avail. does the DIS have to be
mounted to the plenum  to work properly?
> My other option is to try throwing in my spare coil pack to see if that
works. Im trying these quickly in order to save the tow home.
> any suggestions?
> thanks
> Curt
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes