[Shotimes] ECT questions

[John Zarebski]

When I replaced my ECT I used a 1" deep socket.  The torque on the sensors
is 11-17 ft lbs. Not much.

John
93 MTX

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]On Behalf Of Paul Nimz
Sent: June 23, 2003 10:37 PM
To: van Oss; shotimes@autox.team.net
Subject: Re: [Shotimes] ECT questions


1" is sloppy maybe a deep 25 mm"  (just saw this on SHOforum)

Paul Nimz
'97 TR
'93 EG mtx



----- Original Message -----
From: "van Oss" <vanOss@centurytel.net>
To: <shotimes@autox.team.net>
Sent: Sunday, June 22, 2003 2:22 PM
Subject: [Shotimes] ECT questions


> 1.  Anyone know what size socket is good for R&R on the ECT sensor?
>
> 2.  With the ECT disconnected, the car side of the connector shows only
4.36
> volts.  Shouldn't I be seeing closer to 12V?
>
> Joseph van Oss
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes