[Shotimes] Valve adjust sources?

[Kevin & Cheryl Airth]

Walt:
 Add new plugs to the list and possibly plug well seals. I found it is quite
common for the plug wells to be full of oil. I have just used silicon to
reseal but have had several cars start to leak in a short time. Now I
replace the plug well seals and use silicon on them. No leaks since I
started to use this method.
Have your tried SHO NUT for parts?

 I would really recommend doing the full service but if not then the way you
have broken it down is the best. Have you looked at the FAQ? Very good
instructions with great color pictures for the 3.2 L timing belt, water
pump, crank sensor service.

http://tinyurl.com/f8sj
.
.



> My cam cover sprung a leak (94 3.2L) so with 94K miles I thought I'd go
> ahead and do the valve adjustment and plug wires at the same time I
replace
> the gasket.
>
> What's the best source for the shims, wires and related parts? Local Ford
> dealer talks a lot about NLA shim sizes.
>
> I'm planning to wait 6 months or so to do the timing belt, water pump and
so
> on.
>
> Thanks,
>
> Walt Greenwood
> Everett, WA