[Shotimes] No Brake lights...

[Bob and Anonda]

Just a little to add to this.  When I did the one on my previous XR7, I got
a brake light switch from Autozone.  It did not work at all unless you put
an extreme amount of pressure on the pedal.  I got one from my local Ford
dealer for about $15, which worked fine.  Turns out the spring in the AZ
unit was too heavy.  The brand of the AZ switch was Standard, IIRC.

Bob
----- Original Message ----- 
From: "Paul Nimz" <niks@dlogue.net>
To: "Adam J. Green" <ajgreen@epix.net>; <shotimes@autox.team.net>
Sent: Friday, June 27, 2003 1:04 AM
Subject: Re: [Shotimes] No Brake lights...


> The BOO switch is a common part and I wouldn't think very expensive.  Look
> elsewhere than the stealer for this.
>
> Paul Nimz
> '97 TR
> '93 EG mtx
>
>
>
> ----- Original Message ----- 
> From: "Adam J. Green" <ajgreen@epix.net>
> To: <shotimes@autox.team.net>
> Sent: Thursday, June 26, 2003 11:45 PM
> Subject: [Shotimes] No Brake lights...
>
>
> > My brake lights havent' been working properly, and so I checked the
small
> > module that is mounted on the brake pedal, a wire fell out of it...
> obvisouly
> > this is the problem. I fixed this once before, but since then if I push
> the
> > break pedal in too far, the lights would go on and turn off. Any ideas
on
> what
> > a new module for the pedal would cost? I'm gonna try to fix it again...
> but I
> > need brake lights.. :)
> >
> >       Thanks !
> > www.geocities.com/greentaurussho
> >
> > Adam J. Green
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes