[Shotimes] EEC-IV Self Test

[Jacob Cassidy]

Thanks for the info all. I found the problem. My 6 connector has a
fourth connector in it. This is where I have to jump mine to. I'm not
sure why it is there and not on its own connector but the test worked
after I used that connector for the jumper. All I got back was code 23
TPS out of range, which is what I had guessed to be the problem.
 
Jacob Cassidy
'90 Currant Red
1st Mod completed:  SS Y-pipe w/catalytic converters and Reinforced
Motor Mounts
Had to start somewhere :-)