Clutch Parts (WAS: [Shotimes] Ring gear)

[Chris "Zap"]

    This is actually the clutch that we are installing in Joy's '94 w/ the
SHONUT ceramic bearing.  I am interested to see how well it performs when
we're all done.  The '95's clutch is starting to act funky now :X  At 148k
I'm wondering how old the clutch on the '95 is because it seems as if the
friction disc is actually wearing out due to how it drives....   Also, if
you are going to use the SHONut kit, remember to KEEP your Pressure Plate
bolts, as they are apparently no longer available, and use Loctite.
Speaking of which, what type of Loctite should be used on the PP bolts?


Thanks,
~Chris
----- Original Message ----- 
From: "Mark Nunnally" <manunnal@netheaven.com>
To: "shotimes" <shotimes@autox.team.net>
Sent: Sunday, June 29, 2003 1:46 PM
Subject: Re: [Shotimes] Ring gear


> >What about the clutch?  I
> > do not plan of drag racing this car.  Is the OEM stuff Ok for most use?
>
>     Paul check out SHO NUT's website.  Try a 9.75" 9 puck fibertuff disc
> with one of the re-inforced PP's.  Street manors and a real strong clutch.
>
> mark
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes