[Shotimes] Location of Leak

[jared gardner]

What is the process to fix such a leak?






>From: "Donelson Don" <1badsho@mail.tnh.net>
>Reply-To: <1badsho@mail.tnh.net>
>To: "jared gardner" <jmcbgardner@hotmail.com>
>CC: <shotimes@autox.team.net>
>Subject: Re: [Shotimes] Location of Leak
>Date: Wed,  5 Mar 2003 10:32:26 -0500
>
>If you have a tranny leak in all probability, the leak is coming from one 
>of your half shaft seals.
>
>These are located were the two half shafts mate into your MTX tranny.
>
>You will see fluid running down from these locations collecting at the 
>bottom of the tranny.
>
>dond
>
>---------- Original Message ----------------------------------
>From: "jared gardner" <jmcbgardner@hotmail.com>
>Date:  Wed, 05 Mar 2003 06:59:25 -0700
>
> >My '91 has started to leak what I believe to be tranny fluid.  Now I'm 
>not
> >sure if that is what it is.  I have been under the car and wiped it down,
> >but the leak is somewhere on the backside of the engine where I can't 
>see.
> >I thought at first it was an oil leak from one of the oil sensors based 
>on
> >the location of the drips, but I'm sure that they are not the culprits.  
>Any
> >ideas what may be leaking?  I know that it is difficult to try to 
>diagnose
> >such things without seeing.  Just trying to see if any one has had the 
>same
> >thing.
> >
> >I have a broken motor mount that is needing to be fixed that I have
> >neglected for a while don't know if that is important to the equation or
> >not.
> >
> >Thanks for any info.
> >
> >Jared Gardner
> >'91 White/Mocha 95K  "with a small incontinence problem at the moment" 
>(the
> >car that is)
> >
> >
> >
> >
> >
> >_________________________________________________________________
> >The new MSN 8: smart spam protection and 2 months FREE*
> >http://join.msn.com/?page=features/junkmail
> >_______________________________________________
> >Shotimes mailing list
> >Shotimes@autox.team.net
> >http://www.team.net/mailman/listinfo/shotimes
> >
>
>--
>
>dond
>91 Super SHO II
>
>All work & assembly done by yours truly  : )
>
>-3.2 ATX block
>-FPS hi-flow heads w/  over sized valves
>-Stage I cams
>-SHONUT adjustable timing sprockets
>-Ported intake & runners
>-Ported and extrude honed exhaust manifolds
>-Hi-flow catless Y pipe
>-Hi-flow exhaust
>-BBB
>-SHO SHOP T.B.
>-SHONUT phenolic spacers
>-Quaife
>-CAI
>-UDP
>****
>-Cowl hood
>-Momo 17x8 rims
>-Police grill
>-Custom two tone interior
>-Complete sunpro gauges
>oil temp / water temp / oil pressure
>****
>-Tokico shocks/Eibach springs
>-Polyurethane at all corners
>-Solid-sub frame bushings
>-Frame stiffners
>-Adjustable rear control arms
>-Battery located in trunk for better weight distrubution
>****
>-12" rotors at all four corners
>-Steel braided lines
>
>
>--
>_______________________________________________
>Shotimes mailing list
>Shotimes@autox.team.net
>http://www.team.net/mailman/listinfo/shotimes


_________________________________________________________________
MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*.  
http://join.msn.com/?page=features/virus