[Shotimes] Front 96+ upgrade

[Paul L Fisher]

Hmmm... Autozone doesn't carry that size it looks like. If you want to look,
tell them it is for a 2001 SLO or a '97 Thunderbird SC.

Paul L Fisher
'93 Ford Taurus SHO Crimson Clearcoat ATX 171K Build date 11/18/1992
- K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back, Holley
190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus
Stainless Steel Y-pipe, '96 brake upgrade, Proportioning valve plugs, Delrin
sub-frame bushings, Amsoil Series 2000 0W-30 oil, Amsoil Synthetic ATF.
'00 Ford Explorer XLT 5.0L V8 AWD Oxford White Clearcoat 41K Build date
11/19/1999
- Amsoil Series 2000 0W-30 oil, K&N Fuel Injection Performance Kit

SHO Club member http://www.shoclub.com/
Check out my web site http://www.paul-fisher.com/
Amsoil dealer http://www.paul-fisher.com/oil.htm

Get $5 free from Paypal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6

----- Original Message -----
From: "Paul L Fisher" <sho@paul-fisher.com>
To: "Bruce Malachuk" <bmalach1@nycap.rr.com>; "SHOtimes"
<shotimes@autox.team.net>
Sent: Sunday, March 09, 2003 9:54 AM
Subject: Re: [Shotimes] Front 96+ upgrade


> The correct size is available from Performance Friction, they just don't
> list it. The part # is 5984 (new number 0598.20). I personally got the
Ford
> ones from Ford Parts Network XF3Z-2001-CB
>
> Paul L Fisher
> '93 Ford Taurus SHO Crimson Clearcoat ATX 171K Build date 11/18/1992
> - K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back,
Holley
> 190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus
> Stainless Steel Y-pipe, '96 brake upgrade, Proportioning valve plugs,
Delrin
> sub-frame bushings, Amsoil Series 2000 0W-30 oil, Amsoil Synthetic ATF.
> '00 Ford Explorer XLT 5.0L V8 AWD Oxford White Clearcoat 41K Build date
> 11/19/1999
> - Amsoil Series 2000 0W-30 oil, K&N Fuel Injection Performance Kit
>
> SHO Club member http://www.shoclub.com/
> Check out my web site http://www.paul-fisher.com/
> Amsoil dealer http://www.paul-fisher.com/oil.htm
>
> Get $5 free from Paypal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6
>
> ----- Original Message -----
> From: "Bruce Malachuk" <bmalach1@nycap.rr.com>
> To: "SHOtimes" <shotimes@autox.team.net>
> Sent: Sunday, March 09, 2003 9:24 AM
> Subject: [Shotimes] Front 96+ upgrade
>
>
> > Anyone have any input on what I should do for brake pads in the front
for
> my
> > 96+ upgrade? I was just going to use the Ford pads (SM) that are on my
94
> > calipers (replaced at 55k by PO) which are still in really really great
> shape,
> > but I can get the PFC Cabron Metallic pads at autozone today for $30.
> Granted
> > that they are the 601 size and not the 598, but I figure that I'm not
> really
> > missing out on that much extra sweep at least for now. Alternatively I
> could
> > wait a few weeks and then order up a set of the Carbotech F-Streets
> whenever
> > Josh has them back in stock. Kinda need thoughts on this quick cause I'm
> > thining of heading to Autozone right now.
> >
> > Thanks
> >
> > Bruce
> > 94 Opal Frost MTX
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes